fish finder – RAILBLAZA Canada

Fish Finder Mount R-Lock S

Railblaza Canada — Wed, 03 Sep 2025 07:05:59 +0000

Big screens need serious support. The RAILBLAZA Fish Finder Mount R-Lock S is built to hold larger fish finders—up to 5.5 pounds—without flinching. Designed for units like Garmin Striker, Lowrance Elite, and Humminbird Helix 5 and 7, this mount delivers full tilt, swivel, and rock-solid friction-lock stability through two R-Lock joints. Mount it to any StarPort, adjust it on the fly, and trust it to stay locked in whether you’re running through chop or working a point. Tool-free installation means no wasted time at the ramp, and the marine-grade polymer build means it won’t fade, crack, or rust no matter how salty your sessions get. When your sonar is your eyes, you need a mount that doesn’t blink. This is it.

The post Fish Finder Mount R-Lock S appeared first on RAILBLAZA Canada.

Fish Finder Mount R-Lock R

Railblaza Canada — Wed, 03 Sep 2025 07:05:58 +0000

Lock in your sonar and dial in your setup. The RAILBLAZA Fish Finder Mount R-Lock R is built to hold fish finders up to 3.3 pounds with dead-on precision and zero wobble. Designed for Lowrance Hook2, Reveal, and other mid-sized units, it features RAILBLAZA’s signature dual R-Lock friction joints—so you get rock-solid hold with full adjustability, no tools required. Mount it to any StarPort and fine-tune your screen angle in seconds, whether you’re casting, trolling, or spotting ledges. Salt, sun, and splash don’t faze it. This mount is made from UV-resistant, high-impact polymers and stainless hardware, built to take a beating and keep your electronics right where you want them. If you fish hard and expect your gear to do the same, this is the mount that shows up ready.

The post Fish Finder Mount R-Lock R appeared first on RAILBLAZA Canada.

Fish Finder Mount R-Lock Hook 2

Railblaza Canada — Wed, 03 Sep 2025 07:05:40 +0000

Dial in your Lowrance Hook2 like it deserves. The RAILBLAZA Lowrance Hook2 Fish Finder StarPort Adjustable Extender gives you full tilt, swivel, and quick-release control from any StarPort base. Designed specifically for Hook2 4x and 5 models, this extender gives you extra height and reach without sacrificing deck space or stability. The friction-lock arm keeps your screen locked in tight, even when you’re punching through chop or spinning in current. No tools, no drilling—just a clean, direct mount that puts your sonar exactly where you want it. Snap it in, adjust the view, and stay locked on target. Whether you’re sight fishing, trolling, or scanning ledges, this setup keeps your screen visible, stable, and out of the way until you need it.

The post Fish Finder Mount R-Lock Hook 2 appeared first on RAILBLAZA Canada.

Garmin Fishfinder Mount Low Profile

Railblaza Canada — Wed, 03 Sep 2025 07:05:20 +0000

Keep your gear low, tight, and locked in. The RAILBLAZA Garmin Fishfinder Mount Low Profile is built for anglers who want rock-solid performance without the bulk. Designed specifically for Garmin Striker 4 and Echomap 4 models, this mount sits close to your deck, minimizing clutter and maximizing stability—even when you’re bouncing through chop or reaching around mid-cast.

It plugs into any RAILBLAZA StarPort and uses a friction-fit platform that holds your screen in place without twisting loose or drifting off-angle. It’s simple, smart, and surgically clean—just the way serious rigs should be.

Made from marine-grade polymers that won’t crack under pressure or corrode after a saltwater session. If you’re running tight lines in tight quarters, this is the fishfinder mount that keeps it all dialed in.

The post Garmin Fishfinder Mount Low Profile appeared first on RAILBLAZA Canada.

Garmin Fishfinder Mount R-Lock

Railblaza Canada — Wed, 03 Sep 2025 07:05:19 +0000

Garmin makes killer fish finders—RAILBLAZA makes sure they stay where you put them. The Garmin Fishfinder Mount R-Lock is the no-drill, no-wobble, no-compromise solution for mounting your Garmin Striker 4 or Echomap 4 right onto your kayak, jon boat, or rigged-out skiff. Built with dual R-Lock friction joints, it locks your screen at the perfect angle and keeps it there—whether you’re punching through chop or cranking hard on a deep-water bite. It mounts directly into any RAILBLAZA StarPort, and gives you full adjustability without a single tool. Swap it out, slide it off, or fine-tune the tilt in seconds. Made from UV-stable, marine-grade materials, this mount is built to outlast the elements and outwork whatever DIY setup you used before. Because a fishfinder can’t help you if it’s flopping around like a loose tooth.

The post Garmin Fishfinder Mount R-Lock appeared first on RAILBLAZA Canada.

Fish Finder Mount R-Lock S with Miniport TracMount

Railblaza Canada — Wed, 03 Sep 2025 07:05:13 +0000

Your fish finder deserves better than a flimsy bracket and crossed fingers. The Fish Finder Mount R-Lock S with MiniPort TracMount delivers rock-solid performance for larger, heavier units—up to 5.5 lbs—without drilling a single hole. Built for Lowrance, Garmin, Raymarine, and other larger displays, this mount uses RAILBLAZA’s dual R-Lock friction joints to give you precise, locked-in angles that hold their ground when the wake hits. The MiniPort TracMount slides straight into your kayak or boat’s track system, giving you the freedom to reposition or remove your unit in seconds. No tools. No compromises. Just clean, adjustable, and rugged-as-hell performance, so your sonar stays right where you need it—locked, loaded, and leading the way.

The post Fish Finder Mount R-Lock S with Miniport TracMount appeared first on RAILBLAZA Canada.

Fish Finder Mount R-Lock R with Miniport Tracmount

Railblaza Canada — Wed, 03 Sep 2025 07:03:49 +0000

Meet the fish finder mount that actually respects your intelligence—and your track system. The Fish Finder Mount R-Lock R with MiniPort TracMount is your answer to rock-solid, tool-free rigging for Lowrance Hook2, Reveal, and other mid-sized screens up to 3.3 lbs. Designed with RAILBLAZA’s signature R-Lock friction joints, this beast stays locked on target, even when the water gets rowdy. The included MiniPort TracMount slides straight into your existing track system—no drilling, no drama—letting you mount it exactly where you want, then tweak the angle with pinpoint precision. Need to shift from sonar scan to full throttle? One twist and you’re repositioned or removed in seconds. Made from high-grade polymers and stainless hardware, it won’t corrode, fade, or flinch. This is for anglers who don’t settle—for screens that stay put and mounts that stay ready. Your fish finder just met its forever home.

The post Fish Finder Mount R-Lock R with Miniport Tracmount appeared first on RAILBLAZA Canada.

Lowrance Hook2 Fish Finder StarPort Adjustable Extender with Miniport TracMount

Railblaza Canada — Wed, 03 Sep 2025 07:03:47 +0000

This all-in-one kit is the cleanest, toughest way to mount your Lowrance Hook2 fish finder—without drilling a single hole. Designed specifically for the Hook2 4x and 5x models, the mount includes a StarPort Adjustable Extender for dialed-in positioning and a MiniPort TracMount that slides into most standard kayak or boat track systems. You get smooth vertical and tilt adjustments with the R-Lock friction joint, so your screen stays exactly where you want it—even in chop or current. Installation takes minutes, no tools required, and when you’re done fishing, just slide it off the track and stash it. Whether you’re chasing structure in the shallows or trolling open water, this setup gives your Hook2 the visibility and security it needs—without the mess or commitment.

The post Lowrance Hook2 Fish Finder StarPort Adjustable Extender with Miniport TracMount appeared first on RAILBLAZA Canada.

Kayak and Canoe Fishfinder And Transducer Mounts

Railblaza Canada — Wed, 03 Sep 2025 07:03:27 +0000

Your kayak isn’t just a floating milk crate—it’s your stealth rig, and it deserves a fishfinder setup that’s just as dialed. RAILBLAZA’s Fishfinder and Transducer Mounts for kayaks and canoes are the no-drill, no-nonsense way to install and adjust your sonar system without committing to a single spot. Built to fit most popular transducer brands—including Lowrance, Garmin, and Humminbird—these mounts let you position your transducer below the hull for clean signal and better reads, then flip it up to avoid rocks or ramps. Want to pull your fishfinder off after the trip? Done. Everything mounts via StarPort or TracLoader bases, giving you total flexibility, quick removability, and zero cable chaos. From mounting arm to display holder, every piece is engineered to keep your electronics locked in and out of harm’s way—no zip ties, no duct tape, no sketchy DIY rigs. Whether you’re creeping through shallows or charging downriver, this is the setup that lets you see more, rig smarter, and fish like you mean it.

The post Kayak and Canoe Fishfinder And Transducer Mounts appeared first on RAILBLAZA Canada.

HEXX Fish Finder Mount

Railblaza Canada — Wed, 03 Sep 2025 07:02:58 +0000

The RAILBLAZA HEXX Fish Finder Mount is built for anglers running serious electronics in serious conditions. Designed for heavy-duty sonar and chart plotter displays, this mount handles large screens with absolute precision and zero play. It delivers full tilt and 90° lockable rotation, so you can dial in your angle and keep it there—even in chop or hard throttle. Compatible with Garmin, Lowrance, and Humminbird units up to 11 lbs. This mount is ready to work where others wobble. Whether you’re reading structure, tracking bait, or dropping pins, this is display control without compromise. Built for brutal water. Tuned for tactical clarity.

The post HEXX Fish Finder Mount appeared first on RAILBLAZA Canada.