HEXX Fish Finder Mount Instructions

Step 1 – Pilot Holes

Step 1. Drill four (6mm – 1/4″) pilot holes using the base plate as a template.

Step 2 – Drill holes

Step 2. Drill four 10mm (25/64″) holes to mount the base plate.

Step 3 – Insert nuts

Step 3. Push two A nuts into the hex recess in the base plate.

Step 4 – Install base plate

Step 4. Push the backer plate into the four holes with the R facing down and bolt the base plate using the B Philips screws and C nuts.  

Step 5 – Attach Platform

Step 5. Attach large platform to the top knuckle using two bolt D’s, add a washer E to each bolt and hand tighten with thumb wheel F. 

Step 6 – Attach knuckles

Step 6.  Attach the two knuckles (mid sections) together with G and tighten with knob H.

Step 7 – Attach Fish Finder Bracket

Step 7.  Attach your fish finder bracket to the platform. 

Step 8 – Attach to base plate

Step 8. Attach to the base plate using thumb wheel J.

Step 9 – Complete

Step 9.  Your install is now complete!